Engineer - Product Quality - Malaysia - Robert Bosch Engineering and Business Solutions Limited

Robert Bosch Engineering and Business Solutions Limited Malaysia

3 days ago

Robert Bosch Engineering and Business Solutions Limited background

Full time

Description

Job Description

1. Job Summary
1.1 Responsible for new product quality requirement.
1.2 Ensure products manufactured meet product & process quality requirements.
1.3 Customer complaint resolution and product warranty improvement.

1.4 Develop, review and monitor the effectiveness of quality control procedures and processes, propose and implement improvements where necessary.

1.5 Ensure closed loop of internal and external audit finding include product safety audit.
1.6 Monitor and supervise QMM technician performance to ensure efficiency in quality management process.
1.7 Responsible for process improvement project and update Management on the improvement result.
1.8 Responsible for Quality problem resolution through problem solving process PSS/8D.
1.9 Generate and maintain inspection plan for in-process (EQ, FQ) and outgoing (VQ).

1.10 Responsible for component first article inspection approval (ISIR) and approval on incoming part inspection plan including cost reduction activities.

1.11 Monitor, report of KPI's in timely manner and establish action plan.
1.12 Any other tasks or responsibilities assigned by superior.

2. Job Scope
2.1 NEW PRODUCT INTRODUCTION
2.1.1 Responsibility for - Start up projects, warranty, customer complaint, first article approval (ISIR), reliability testing (QZ), etc.
2.1.2 New project product qualification test include fulfill the regulation requirement.
2.1.3 Actively involves in FEP, QG, FMEA, CP and production line release.
2.1.4 Prepare product test plan, product inspection plan (EP), QZ test plan and FQ/VQ
checklist.
2.1.5 Provide training to QMM test technician on all the related inspection plan and checklist.
2.1.6 Work with service center to understand the product quality level in the market.
2.1.7 Coordinate project testing, investigate the failure and ensure close loop of the
action implemented.
2.1.8 Responsible for part release and incoming inspection plan.
2.1.9 Ensure all ISIR requirements are fulfill before ISIR released e.g. S,F,L,
and Cpk 1.33, etc
To ensure measurement methodology alignment between PgP2 and supplier.
To ensure all related fixture including short endurance for VQ/FQ audit, practical
test are ready before pilot.
Lead Q-VSM process and ensure fulfillment during pilot stage.
2.

2 OPERATION SUPPORT / VALUE STREAM QUALITY:
2.2.1 Responsible for product & process quality in Value Stream, support
VSM on product & process quality performance.
2.2.2 Responsible for quality management in process changes, sorting &
rework flow buyoff, concession management, customer complaint management, etc in the Value Stream
2.2.3 Responsible for quality management of ALR, product relocation, plant
to plant activities, new line/equipment, machine/process parameters/software buyoff, etc
2.2.4 Support & drive PUQ on supplier incoming material quality issue
disposition and 8D verification and evaluation.
2.2.5 Support cost saving, 2nd / alternatives source activities and approve
alteration change.
2.2.6 Regular review with production personnel for CP and FMEA.
2.2.7 Perform failure analysis on customer - warranty complaint tool and drive for
improvement to achieve the agreed target.
2.2.8 Ensure ANDI contents is checked before release and implemented
correctly.
2.2.9 Conduct periodic audits to ensure line and process compliances.
Conduct Failure Investigation with cross-functional team for non-conformance incidents.
Drive cross functional team for Quality process improvement (e.g. Q- VSM, functional test quality gates, MES quality data analysis, etc)
Responsible for plant to plant quality complaint management.
Responsible for product transfer on quality measures between plant.
Responsible for monthly Quality meeting, warranty analysis reporting.

Qualifications

3.1 Formal Education
3.1.1 Bachelor Degree or equivalent in Mechanical / Electrical & Electronics Engineering or Science.
3.1.2 Proficiency in spoken and written English and Bahasa Malaysia. Understand mandarin will be preferred.
3.2 Knowledge and Exposure
3.2.1 Minimum of 2 years experience in a manufacturing environment (Engineering, quality or project management).
3.2.2 Good in technical report writing and include complete data analysis and action
recommendation.
3.2.3 Experience in Plastic molding, metal stamping, turn part, PCBA, die-cast, hardening part is required. Knowledge in software coding will added the advantages
3.2.4 Knowledge of ISO 9001 Standard, TS16949, EN Product Standards, Product safety
requirement e.g. UL, CSA.
3.2.5 Familiar with Statistical QC tools & measurement methods, FMEA, MSA, SPC, etc.

3.2.6 Able to understand and interpret technical drawing and perform measurement with measuring equipment such as CMM, vision scope, profile projector, gear profile and hardness tester.

3.2.7 Hand on experience on failure analysis and problem solving methodology e.g. 5 Why's, RCA, fault tree analysis etc.
3.3 Knowledge, Skills and Ability
3.3.1 Ability to apply in-depth knowledge of problem solving technique in solving Quality issues including risk assessment evaluation.
3.3.2 Effective communication skills with all levels within the organization, suppliers and customers.
JOB DESCRIPTION Version
3.3.3 Proficient in application of DOE, SPC, MSA, Process Capability and 8D.
3.3.4 Ability to manage personnel time to ensure completion of assignments.
3.3.5 Ability to work with minimum supervision and self-motivation.

Supervisor - Quality Control & Packing (Production)

2 days ago

Hartalega NGC Sdn Bhd Malaysia Full time

Supervisor - Quality Control & Packing (Production) · RM 2,600 - RM 3,850 a month - Permanent, Full-time · Job details · Here's how the job details align with yourprofile . Pay · RM 2,600 - RM 3,850 a month · Job type · Permanent · Full-time · Shift and schedule · Rotat ...
Production Technician

3 days ago

Jowat Manufacturing (SEA) Sdn Bhd Malaysia

Job Description Carry out production activities base on planning from Production Manager or planner. Ensure and properly maintain and operate the production machine and equipment in a safe manner according to SOP given. Responsible and monitor all products, conform to product qua ...
QA Manager

1 week ago

NodeFlair Malaysia

**Job Summary**: · **Salary** · RM13,000 - RM15,999 / Monthly · **Job Type** · **Seniority** · Manager · **Years of Experience** · Information not provided · 1. Manages projects by customer account basis covering global manufacturing sites to achieve customer-required business pe ...
Production Manager

4 days ago

Ambition Malaysia

**Job details**: · Posted 19 February 2024 · SalaryNegotiable · LocationMalaysia · Job type Permanent · DisciplineEngineering · Reference268325_ · This global semiconductor company in Melaka is seeking a Production Manager. · **Key Responsibilities**: · - Production Planning and ...
Squad Owner

1 day ago

Combined Insurance Malaysia

Drive end-to-end digital product lifecycle to achieve business outcomes aligned with strategic priorities and corresponding objectives and key results (OKRs). Lead a multidisciplinary team to deliver high quality work product (e.g., software, analytics, business intelligence, dat ...
Production Manager

1 week ago

Agensi Pekerjaan Glory HR Solutions (M) Sdn. Bhd. Malaysia

A fast growing company is seeking a skilled and motivated **Production Manager** to oversee the manufacturing of wood products. · **Responsibilities**: · - Manage production processes to meet customer demands and delivery schedules. · - Lead and motivate the production team to en ...
Operator

5 days ago

Camfil AB Malaysia

**Job Summary and Key Objectives** · **The key activities of the Production Department are as follows: · - ** · - To manufacture the different types/ranges of air filters at the correct quality to meet or exceed the customer's requirement. · - To manufacture quality products to m ...
Account & Admin Assistant

1 day ago

WIN SMITH PACKAGING SDN BHD Malaysia

TO HANDLE RECRUIT EMPLOYEES FOR THE COMPANY TO HANDLE RELATED TO LABOUR LEGISLATION TO ASSIST IN ADMIN MATTERS TO ASSIST IN ACCOUNT MATTERS · WIN SMITH PACKAGING SDN BHD was incorporated as private limited company on 06th September 1996. is principally involved in printing of shr ...
Quality Director

3 days ago

Ambition Malaysia

**Job details**: · Posted 19 March 2024 · SalaryNegotiable · LocationMalaysia · Job type Permanent · DisciplineEngineering · Reference272057_ · Our client is a MNC. Due to rapid expansion, they are seeking a Quality Director. · **Key Responsibilities**: · - Develop and implement ...
Data Analyst

1 week ago

NodeFlair Malaysia

**Job Summary**: · **Job Type** · **Seniority** · Mid · **Years of Experience** · Information not provided · **Tech Stacks** · GitLab Analytics SQL · The Product Analytics team is looking for a passionate Data Analyst. Our job is to identify product growth points, monitor product ...
Welder Fitter

3 days ago

BRAC INDUSTRIES SDN BHD Malaysia

1.Responsible for fitting and welding of steel, aluminum and stainless steel parts using a MIG and/or TIG process. Also required to perform other miscellaneous tasks, as assigned by his or her supervisor. 2.PRIMARY RESPONSIBILITIES - Set up welding machines based on the job at ha ...
Sales & Marketing

1 week ago

WIN SMITH PACKAGING SDN BHD Malaysia

*Responsibilities:* 1.Identify and develop new business opportunities in Klang valley and outstation. 2. Foster strong relationships with existing clients. 3.Collaborate with marketing for effective strategies. 4. Stay updated on industry trends and competitors. 5.Present sales p ...
Operations Director

4 days ago

Ambition Malaysia

**Job details**: · Posted 19 February 2024 · SalaryNegotiable · LocationMalaysia · Job type Permanent · DisciplineEngineering · Reference268086_ · My client is a leading semiconductor manufacturer in Melaka. They are seeking an experienced and dynamic Operations Director to lead ...
Administrator, Production

3 days ago

PENANG AUTOMATION CLUSTER SDN BHD Malaysia

To receive incoming parts from external customers, SMEs and PAC production with proper recording and filing. · - To perform quality inspection of all parts to ensure no defects before delivery. · - To support in packing the parts after quality inspection before delivery. · - To p ...
Fsq Intern

1 day ago

Fonterra Malaysia

**General Information**: · - Date Published- 21-Mar-2024- Advertising Ends- 04-Apr-2024- Country- Malaysia- Location- Malaysia- Role Type- Science & Technology- Work Type- Temp- ID#- 7977**Position Description**: · **Role Purpose**: · Location: Dairymas Plant, Lot 7&9, Jalan Sung ...
Lrc Supervisor

1 week ago

Giggle Garage Sdn Bhd Malaysia

We are looking for LRC Supervisor that possess high level of knowledge in Unreal pipeline in TV Series production, combined with strong creative and visual instincts. This position is a supervisory level will report directly to the Head of Production or Producer. · **Key Responsi ...
Manager (Ccm)

1 day ago

JXR Manufacturing Sdn Bhd Malaysia

Metal production managers organise and manage the day-to-day and long-term project work in a metal fabrication factory, to process basic metals into fabricated metals. They create and schedule production plans, recruit new staff, enforce safety and company policies, and strive fo ...
Quality Control Supervisor

3 days ago

Baba Products (M) Malaysia

**Date**:28 Nov 2023 · **Location**: MY · **Company**:Baba Products · **Job Summary (Brief summary of Job Responsibility)**: · Perform inspections, checks, tests to evaluate incoming raw materials, in-process and finished goods. Perform review of final products to ensure quality ...
Packaging Technologist

1 week ago

Kellanova Malaysia

Role Purpose · Be the Enstek contact for packaging related supply chain ,engineering and quality projects, technical qualification for Innovation and value engineering projects. Focus on Enstek packing line improvements - throughput/ quality ensuring all new artworks meet line re ...
Technical Operations Lead

1 week ago

LexisNexis Malaysia

About the role · - Assume responsibility in ensuring publication content released both online and in print in a timely manner in accordance with budgeted plans at agreed standard of quality and cost; working alongside Editors · - Assure the integrity, quality and currency of the ...