Ahmad Aliyan Alif Bin Ismail
About Ahmad Aliyan Alif Bin Ismail:
A resourceful Chemical Process and Instrumentation Engineer Graduate majoring in Plant Process Engineering focusing on Energy & Process Optimization with experience of working in the Research and Development field and on-site field work (commissioning and maintenance). Team player, fast-learner and quick to adapt to different working environments. Enthusiastic and motivated by challenges, result and quality-oriented with clear work ethics. Experienced working with standards and has considerable knowledge in #ISO 9001 and ISO 14001 standardization.
Experienced in front end processing. My previous experience includes:
1. PROCESS DESIGN AND OPTIMIZATION
-Involved in designing front-end azeotropic distillation process line and mechanical detailed design of distillation tower which complies ASME and PTS standards. Successfully turned wastewater into value profit product with 40% cost reduction.
2. PROJECT MANAGEMENT AND COMMISSIONING
- Involved with project engineering, procurement, construction and commissioning (EPCC) for two major turnaround project which are:
- Petron P1 Alarm PLC System Upgrade
- BASF-Petronas Provision of OCC-SIS Instrument Maintenance and Inspection.
- EDRA Tuah 2,242MW CCGT Electrical Heat Tracing
- Sarawak Energy CCPP EHT and Insulation
3. PROCESS INSTRUMENTATION
- Involved with process instrumentation calibration and inspection, PLC Programming, troubleshooting and instrument commissioning.
4. PROCESS ECONOMIC EVALUATION
- Involved with economic evaluation for most of my study projects which includes (but not limited to) product marketability, process feasibility, breakeven point and increasing product value.
5. PERIODIC MECHANICAL MAINTENANCE
- Involved in periodic mechanical maintenance in a palm oil refinery (I.O.I Edible Oils) with Kanban and Kaizen managing method’s implementation.
6. ELECTRICAL HEAT TRACING AND THERMAL SOLUTIONS
- Involved in Engineering, Procurement, Installation and Commissioning of Total Pipe Thermal Solutions for Gas Turbine system in various Power Plants.
7. ELECTRICAL POWER DISTRIBUTIONS
-Involved wpith pre-commissioning and commissioning of ABB 11kV switchgear, ABB 400V switchgears at substation, 33kV/11kV JSHP Delta-Y transformer,11kV/415kV JSHP Delta-Y transformer, 11kV MV Capacitor bank and 230 VAC UPS System.
8. INSTRUMENTATION & CONTROL
- Involved with pre-commissioning and testing of Yokogawa smart transmitters, Siemens S7 PLC, Rosemount Smart transmitters, and temperature elements, KOSO Valve positioners, Foxboro valve positioners, and Rotork solenoid valves.
- Involved in loop testing, 9-points calibration verification test, valve stroke test, End-to end -
equipment and alarm testing for Distributed Control System.
Currently, I am seeking opportunities for self-expansion and company contribution in engineering industry.
Experience
- Overseeing Electrical & Instrumentation construction and projects for Pelican ASU Gas Plant Project for INTEL Malaysia in Bayan Lepas, Penang. Taken multiple roles focusing project and construction phase from MDR, engineering, construction & commissioning. Helps project and construction manager in executing construction and reporting progress to higher management.
• Involved with FAT of metering Skid for early nitrogen gas supply and FAT for ASU Plant Distributed Control System.
• Involved in design and engineering of whole ASU Plant Cableway and ducting.
• Involved in commissioning of project’s early gas supply (Underground pipeline and metering skid) and Backup Supply area (Tank farm) for Nitrogen, Oxygen and Argon gas supply.
• Involved with commissioning of smart flow computer for billing of nitrogen early gas supply.
• Involved with pre-commissioning and testing of Yokogawa smart transmitters, Siemens S7 PLC, Rosemount Smart transmitters, and temperature elements, KOSO Valve positioners, Foxboro valve positioners, and Rotork solenoid valves.
• Involved in loop testing, 9-points calibration verification test, valve stroke test, End-to end -
equipment and alarm testing for Distributed Control System.
• Involved with pre-commissioning and commissioning of ABB 11kV switchgear, ABB 400Vswitchgearrs at substation, 33kV/11kV JSHP Delta-Y transformer,11kV/415kV JSHP Delta-Y transformer, 11kV MV Capacitor bank and 230 VAC UPS System.
• Involved with earthing and lighting protection system design, engineering, and installation.
• Involved with plant compound lighting design, engineering, and installation.
• Involved with design and installation of ASU Plant network, communications, PA systems, cloud
integration, internet, and intranet.
• Involved with design and installation of electrical facilities and small power outlets for the whole ASU Plant and buildings including maintenance socket, welding receptacles, tanker pump sockets, MVAC and HVAC system.
• Participate in review of project basis of design based on client’s technical standards and specific project requirement, technical queries, and active participation in the stage of data gathering from Clients.
• Participate in review of electrical, earthing, protection & control philosophy, and design standards by referring to international standard code.
• Participate in electrical equipment sizing calculation review, equipment specification & data sheets.
• Participate in preparation of material requisitions, vendor’s offers, technical bid analysis, Vendor drawing reviews, upstream disciplines input reviews, Third party deliverable reviews.
• Participate in review of electrical I/O list, Interface list, interconnection wiring diagrams, communication network, substation design and electrical facilities.
• Participate in ETAP fault current simulation and 3D models reviews.
• Involved with design, engineering, testing, and commissioning of UL/FM Cerberus Pro FC924 Fire Fighting system and TXR-320 Fire Supressant system.
Education
- BACHELOR IF ENGINEERING (HONS) in Chemical Engineering majoring in Plant Process Engineering & Design
Professionals in the same Engineering / Architecture sector as Ahmad Aliyan Alif Bin Ismail
Professionals from different sectors near Kampung Baharu Nilai, Negeri Sembilan
Other users who are called Ahmad Aliyan Alif
Jobs near Kampung Baharu Nilai, Negeri Sembilan
-
Sales Executive
Found in: Foundit MY A2 - 14 hours ago
BON Estates Malaysia, Kuala Lumpur Full timeJOB DESCRIPTION · To handle all forms of sales inquiries including walk in, phone calls, events and etc and to ensure all sales inquiries are responded within 24 hours' time frame. · To actively cultivate, engaging and seeking new sales opportunities. · To build and maintain goo ...
-
Senior Network Engineer
Found in: Foundit MY A2 - 14 hours ago
Agensi Pekerjaan EPS Consultants Sdn Bhd Kuala Lumpur, Malaysia Full timeClient Background: · ICT solutions provider specializing in IT consultancies, network and storage solutions, IT security solutions, system solutions, and IT professional services across various industries. · Location: KL · Tenure: Permanent role · Salary: Basic Salary · Key R ...
-
Mechanical Lead
Found in: Talent MY C2 - 6 days ago
Agensi Pekerjaan Executive Recruiters Sdn Bhd Kuala Lumpur, MalaysiaJob DescriptionCultivate and nurture positive relationships with industry networks, clients, architects, government agencies, sub-consultants, and construction contractors pertinent to the MEP Teams endeavors. Align the capabilities of the MEP team with the target markets specifi ...